Hey Everyone, Those who have the ChargePoint Home Flex, did you get faceplate screws for the bottom of the unit? If so what size did you get? I have looked, however I cannot find anything about it.

My home charging cable will not remove from the charging port, it's locked in. This same cable plugged into my husband's Ford Fusion Energi with no problems in 3 years so nothing is wrong with the cable. 1) I've pressed and held the lit 'unlock button' on the charge port on the Mach E -...

Frustrations setting in fast charger station's parking arrangement. I was greatly surprised at Electrified America's stations. Easy to get in and out and multiple units at angles. I have ran into a couple (charge point, blink, greenlot) whose cables are too short. They don't match the parking...

I'm installing a Grizzl-E EV charger with a Splitvolt Splitter Switch plugged into my dryer outlet. The NEMA 14-50 outlet on the Splitvolt is upside down. And the plug on the Grizzl-E is so short that I would have to mount the Grizzl-E upside down below the Splitvolt. I would not want the...

I'm installing a Grizzl-E Classic NEMA 14-50 Plug with 24 Feet Regular Cable (GR1-14-24-Regular). I need to set the dip switches for 24 Amps since I'm plugging it into a 30-Amp dryer outlet. However, the online manual shows 3 dip switches numbered 3-2-1. But the device has 4 dip switches...

A Dealership in the UK has installed at least one of their new EV chargers.