Mach-E Forum | Ford Mustang Mach-E Forum and News banner

Charging Errors

4.9K views 8 replies 6 participants last post by  Ford Motor Company  
I've been fighting to get charging errors fixed for at least a year. Same issue, the dealer could not duplicate the error. I finally got it fixed today, by replacing the receptacle and cable. This has worked for some others on the forum as well, so it is possible your issue is related to a bad receptacle.

Higher amp level 2 chargers were more likely to cause it to fail, my dealer had a low amperage car charger which made it hard for them to detect. I turned down my home charger from 40 amp to 32 amps and it helped for a while. It recently got worse, so they were able to see it, even on a 32 amp charger.

Picture of replaced part - it's attached to a bunch of the wiring harness, it all has to be changed as one unit.
Image
 
Thank you for the information. This is very helpful.

It sounded like you were having problems mainly with L2 charges. I am wondering if this also was showing up with L3 chargers. Mine is worse with L3 chargers.
My problem was overheating with L2 chargers for the most part, L3 chargers still worked for me until recently, when the problem got worse. Then I experienced charging stops on L3 chargers as well.