Mach-E Forum | Ford Mustang Mach-E Forum and News banner
21 - 33 of 33 Posts

Registered
Joined
320 Posts
MacMike,

I would and would like to, but called the hotel and they do not have any EV chargers. I had a couple MME guys that wanted to come, but no juice there.

BTW, what are the "prizes" that are given away. Very few MMEs will have any customization. Strictly stock for a while. I added some hangy down dice and some fuzzy stuff around the gear knob (just kidding).

馃槑You ICE guys will have to dominate the show.
EA chargers at the Walmart in League City TX. Just 7 miles from the show. First 100 to register get a goodie bag and winners get trophies. I visit SA on a regular basis with no issue with range. My top=off charging is done in Columbus,TX right off I-10, ez-off ez-on.
 

Registered
Joined
286 Posts
EA chargers at the Walmart in League City TX. Just 7 miles from the show. First 100 to register get a goodie bag and winners get trophies. I visit SA on a regular basis with no issue with range. My top=off charging is done in Columbus,TX right off I-10, ez-off ez-on.
Where in Columbus ?
 

Registered
Joined
15 Posts
Discussion Starter · #24 ·
It looks great! We just drove ours up to Austin with plenty of charge to spare and only needed to use a fast charger on the way back to Houston. Trip went without a hitch.
 

Registered
Joined
286 Posts
Good to see that there were no holes drilled out for the front LP
 

Registered
Joined
194 Posts
I specifically ordered mine without a front license plate bracket, but this is a dealer installed option. So I blanketed the dealership with notices not to put it on. They didn't. Left the bracket in the back. Here is my front end without a plate. Very smooth.

6379


Also had ceramic tinting put on all the glass except the sunroof and clear ceramic on the windshield. Made a HUGE difference in the admitted heat. Blocks 98% of uV .

NOTE: if you have TollTag or other RFID tags on your windshield, you need to put them up by the rearview mirror in the black hatched area. The coating on the rest of the windshield will block the RFID signal (even before I added the ceramic). Up in that area it is not noticeable inside the vehicle, and works fine with the RFID readers. When the added the ceramic to the windshield, I had them not put it on this area. I can't tell where they started and stopped.
 

Registered
Joined
286 Posts
I specifically ordered mine without a front license plate bracket, but this is a dealer installed option. So I blanketed the dealership with notices not to put it on. They didn't. Left the bracket in the back. Here is my front end without a plate. Very smooth.

View attachment 6379

Also had ceramic tinting put on all the glass except the sunroof and clear ceramic on the windshield. Made a HUGE difference in the admitted heat. Blocks 98% of uV .

NOTE: if you have TollTag or other RFID tags on your windshield, you need to put them up by the rearview mirror in the black hatched area. The coating on the rest of the windshield will block the RFID signal (even before I added the ceramic). Up in that area it is not noticeable inside the vehicle, and works fine with the RFID readers. When the added the ceramic to the windshield, I had them not put it on this area. I can't tell where they started and stopped.
lets see how long till the Texas traffic Nazi's (DPS) snag ya ! Beautiful vehicle !
 

Registered
Joined
286 Posts
No front plate on my Z06 corvette and was stopped at least 8 times and 2 tickets in San Antonio
 
21 - 33 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top